ALEASHA 21" Commercial Sink Faucet Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This aleasha 21 commercial sink faucet review covers a wall-mount unit designed for high-volume kitchens. It features a 21-inch reach and a 1.42 GPM pre-rinse sprayer. The heavy-duty construction uses solid brass with chrome plating. You get a 19-inch stainless steel hose for 360-degree coverage. The adjustable center fits between 7.75 and 8.25 inches. This setup targets professional environments needing durability and speed. The design prioritizes function over aesthetics, with a focus on leak-proof performance and resistance to corrosion. It is built to withstand the rigors of busy commercial dishwashing stations.
What stands out
- 1.42 GPM high-velocity pre-rinse sprayer with hold-down ring
- 19-inch stainless steel hose tested for 100,000 bend cycles
- Adjustable 8-inch center distance (7.75 to 8.25 inches)
- Solid brass construction with multi-layer chrome plating
- Two interchangeable aerators: 1.8 GPM and 2.2 GPM
Who it fits
Good fit for
This faucet suits commercial kitchens, dishwashing stations, and facilities with 1 to 3 compartment sinks. The adjustable center distance helps match existing wall supply lines, making installation straightforward for retrofits. The high-velocity spray and hold-down ring benefit staff who need to strip grease quickly and reduce hand strain. If you require a durable, lead-free brass faucet that resists corrosion and handles high pressure, this unit fits your workflow. The included aerators allow you to switch between water-saving and high-flow modes as needed.
Who should skip it
You should look elsewhere if you prefer a deck-mount faucet or need a lower-profile design. This unit requires wall mounting, which may not suit all sink configurations. If you do not need a high-velocity sprayer or the ability to adjust the center distance, this complexity is unnecessary. The chrome finish may not match brushed nickel fixtures in your kitchen. Also, skip this if you need a faucet with a fixed aerator, as this model requires manual switching between two different flow rates.
Verdict: The ALEASHA 21-inch faucet offers robust commercial-grade performance with adjustable fit and high-velocity spray. It is a practical choice for busy kitchens that need durability and efficient cleaning.
Key specs explained for this faucet
Size: 21-inch
This length defines how far the spout extends from the wall. You need enough reach to clear the back of deep commercial sinks. A 21-inch span covers standard three-compartment basins effectively. Compare this to shorter 15-inch models if you have smaller prep stations. Ensure your sink depth matches this extension for full coverage.
Flow rate: 1.42 GPM
Gallons per minute measure water volume and cleaning power. This rate offers high-velocity jets to strip grease quickly. It balances efficiency with heavy-duty performance for busy kitchens. Check local regulations as some areas cap flow at 1.2 or 1.8 GPM. This spec helps you estimate water usage during long wash cycles.
Hose length: 19-inch stainless steel
The hose connects the sprayer to the faucet body. A 19-inch length provides flexibility to reach corners and deep pots. Stainless steel resists kinking and corrosion better than plastic. This durability suits high-traffic environments where hoses bend frequently. Verify that this length allows comfortable handling without tangling during daily use.
Adjustable center: 7.75 to 8.25 inches
This range allows you to match existing wall supply lines. You can shift the inlet distance to fit your plumbing layout. Eccentric flanges make this adjustment simple without complex tools. This feature prevents leaks by ensuring a secure connection. Compare this to fixed-center faucets if your wall pipes are not perfectly spaced.
Design and build analysis
According to the listing, the ALEASHA 21-inch faucet is constructed from certified lead-free solid brass. It features a multi-layer chrome plating finish. This material choice provides resistance to rust and corrosion. The solid brass base is designed to prevent splitting under high pressure. This makes the unit suitable for busy commercial kitchens where durability is critical.
The unit measures 17.3 inches in length, 13.2 inches in width, and 3.74 inches in height. It is a wall-mount fixture, which clears counter space. The spout extends 21 inches from the wall. A 19-inch stainless steel hose allows for 360-degree rotation. This reach helps you cover one to three compartment sinks. The hose is tested for over 100,000 bend cycles to ensure it does not kink or leak.
Installation flexibility is a key design feature. The faucet includes eccentric flanges that allow the center distance to adjust from 7.75 to 8.25 inches. This range matches most existing wall supply lines. You get a 1.42 GPM pre-rinse sprayer with a hold-down ring for continuous spray. The listing notes two interchangeable aerators: a 1.8 GPM water-saver and a 2.2 GPM high-flow option. You can switch these to control flow rate based on your task.
Setup And Daily Operation
Installation begins with the adjustable center distance. The unit includes eccentric flanges and 1/2-inch NPT female inlets. You can set the center distance between 7.75 inches and 8.25 inches. This range allows you to align the faucet with existing wall supply lines. Proper alignment ensures a secure connection without wobbling. The wall-mount design keeps the sink deck clear for easier cleaning.
Daily operation relies on the 1.42 GPM pre-rinse sprayer. The high-velocity jet flow is designed to strip grease quickly. You control the spray using the hold-down ring. This feature allows hands-free continuous operation, which reduces hand strain during heavy washing tasks. The 19-inch stainless steel hose rotates 360 degrees. Combined with a 10-inch swing spout, it covers one to three compartment sinks. The hose is tested for over 100,000 bend cycles, indicating durability against kinking or leaking.
Water flow customization is possible with two interchangeable aerators. You can switch between a 1.8 GPM water-saver aerator, which is CEC compliant, and a 2.2 GPM high-flow aerator for rapid pot filling. This flexibility lets you optimize workflow based on the task. The reinforced brass valve cartridge and thickened locknut provide a leak-proof seal. The multi-layer chrome plating resists rust and corrosion. These specs suggest a setup focused on adaptability and a daily use pattern centered on efficiency and durability in busy commercial environments.
Before You Buy This Faucet
Owning this unit requires attention to your sink configuration. The 21-inch reach clears deep basins, but you must verify your sink depth. The adjustable center distance fits standard 7.75 to 8.25-inch spacing. Check your wall supply lines before mounting. You will need a 1/2-inch NPT connection. The sprayer delivers 1.42 GPM. This flow rate is efficient for rinsing but may fill large pots slower than higher-flow options. You can swap aerators for faster filling if needed. Chrome plating resists corrosion but needs regular wiping to prevent water spots. Hard water areas may require more frequent cleaning. This faucet suits high-volume kitchens where durability matters. It complements your countertop dishwasher by handling heavy pre-rinse tasks. The commercial build withstands frequent use. Ensure your plumbing supports the pressure. The brass construction offers long-term stability. This setup works well alongside your dishwasher for complete sink management. Proper maintenance keeps the chrome finish shiny and functional for years.
Check before you buy
- Verify sink depth matches the 21-inch reach.
- Confirm wall supply lines fit 7.75 to 8.25-inch spacing.
- Check for 1/2-inch NPT connection compatibility.
- Ensure plumbing pressure supports the sprayer flow.
The product at a glance
ALEASHA 21-inch Wall Mount Faucet
Best for: commercial kitchens with wall-mounted supply lines
- Mounting Type
- Wall Mount
- Faucet Type
- Pull Down Pre-Rinse Sprayer
- Hole Configuration
- 8 inch Center
- Spout Reach
- 10"
- Hose Length
- 19"
- Spout Swivel
- 360-degree
View on Amazon: ALEASHA 21-inch Wall Mount Faucet Affiliate link
The ALEASHA 21-inch wall mount faucet features a 19-inch stainless steel hose and a 10-inch swing spout for 360-degree rotation. It includes a 1.42 GPM pre-rinse sprayer with a hold-down ring for continuous spray. The adjustable center distance fits supply lines from 7.75 to 8.25 inches. You get interchangeable aerators for 1.8 or 2.2 GPM flow. This solid brass unit suits busy commercial kitchens needing high-velocity cleaning.
Pros
- 19-inch stainless steel hose tested for 100,000 bend cycles
- 1.42 GPM heavy-duty pre-rinse sprayer with hold-down ring
- Adjustable center distance from 7.75 to 8.25 inches
- Includes interchangeable 1.8 GPM and 2.2 GPM aerators
Cons
- Requires wall mount installation, not countertop
- Fixed 21-inch width limits sink compatibility
- No mention of integrated water filtration
Good fit if
- You need a high-velocity sprayer for heavy grease removal
- You have existing wall supply lines within the adjustable range
- You want interchangeable aerators for different flow needs
Skip if
- You prefer a countertop or deck-mounted faucet
- Your wall supply lines are outside the 7.75 to 8.25 inch range
- You need a faucet with a fixed single flow rate only
Verdict: ALEASHA 21" Wall Mount Commercial Faucet fits commercial kitchens that need a durable, high-flow sprayer with adjustable mounting for existing wall lines. It is ideal for staff who require hands-free continuous spray and flexible aerator options.
Specifications side by side
| Spec | ALEASHA 21-inch Wall Mount Faucet |
|---|---|
| Mounting Type | Wall Mount |
| Faucet Type | Pull Down Pre-Rinse Sprayer |
| Hole Configuration | 8 inch Center |
| Spout Reach | 10" |
| Hose Length | 19" |
| Spout Swivel | 360-degree |
| Valve Type | brass |
| Installation Type | Wall Mount |
| Target Space | Restaurants, Kitchen |
| Features | Pre-Rinse Sprayer |
| Color | Chrome |
| Faucet Centers | 8-Inch Centers |
| Dimensions | 17.3 × 13.2 × 3.74 inches |
| Size | 21-inch |
| Model | 7104200C-21 |
Frequently asked questions
What are the exact dimensions of the ALEASHA 21-inch faucet?
The unit measures 21 inches in length, 13.2 inches in width, and 3.74 inches in height. These physical specifications define the footprint and reach of the wall-mount design. You should verify your sink depth against the 17.3-inch length to ensure adequate clearance.
Is the ALEASHA 21 faucet made of solid brass?
Yes, the construction uses certified lead-free solid brass. This material provides durability and resistance to corrosion in high-volume commercial environments. The brass body is then finished with a multi-layer chrome plating for a clean appearance and added protection.
What type of finish does this commercial faucet have?
The faucet features a chrome finish applied over solid brass. This coating offers a reflective surface that is easy to clean and maintain. The chrome plating helps resist rust and tarnishing, which is essential for kitchens with frequent water exposure and cleaning chemicals.
How does the wall-mount design benefit kitchen staff?
This faucet is designed for kitchens with existing wall-mounted supply lines. It eliminates the need for deck-mounted holes, saving counter space. The 21-inch reach allows staff to access the entire sink basin without stretching, improving efficiency during high-volume washing tasks.
What is the model number for this ALEASHA faucet?
The specific model number is 7104200C-21. You can use this identifier to verify compatibility with your current plumbing setup or to order replacement parts. It distinguishes this 21-inch wall-mount unit from other sizes or styles in the ALEASHA product line.
Does this faucet require special tools for installation?
Installation utilizes standard 1/2-inch NPT female inlets. You will need basic plumbing tools to connect the supply lines and secure the eccentric flanges. The adjustable center distance allows for alignment with existing wall holes, simplifying the mounting process for commercial sink setups.