Havin Upside Down Design Pot Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This havin upside down design pot review focuses on a wall-mount faucet with a unique inverted spout layout. The water outlet sits below the main body, a geometry intended to clear low-hanging cabinets and standard kitchen storage. It uses dual ceramic valves for shut-off and offers a 360-degree swivel via a dual-jointed swing arm. The unit mounts through a single hole and delivers 2.2 gallons per minute at 60 psi. This configuration targets users who need reach without obstruction.
What stands out
- Inverted spout design fits under low cabinets
- Dual ceramic valves for drip-free control
- 360-degree dual jointed swing spout
- 2.2 gpm flow rate for fast filling
- Includes spare cartridge for future maintenance
Who it fits
Good fit for
You should consider this option if you have low-hanging upper cabinets that block standard pot fillers. The inverted spout keeps water below the faucet body, clearing storage space. The 360-degree swivel helps you reach pots on any burner. It suits single-hole wall installations and works well for filling large stockpots quickly. The included spare cartridge adds long-term reliability for frequent users.
Who should skip it
Skip this model if you need hot and cold water mixing. The listing specifies use for only cold water or only hot water, not both simultaneously. It also requires a single-hole wall mount, so it will not fit standard dual-hole setups. If you prefer a single-lever handle for temperature control, the dual-handle design here will feel cumbersome. Check your cabinet clearance carefully before buying.
Verdict: This inverted pot filler solves clearance issues for low cabinets. It offers solid flow and durability for single-temperature kitchen tasks.
Key specs explained for you
Valve Type: Ceramic
Ceramic valves are durable and resist wear better than rubber washers. You get smooth handle operation and reliable shut-off. This design helps prevent dripping over time. If you plan to use the faucet daily, ceramic internals offer long-term consistency. Compare this to older brass or plastic valve designs that may require more frequent maintenance.
Spout Swivel: 360-degree, dual jointed swing
The dual-jointed swing arm allows the spout to rotate fully and reach various positions. You can extend it over large pots or tuck it away when not in use. This flexibility is useful for filling deep stockpots or wide pans on different burners. Look for similar articulation in other pot fillers to ensure full stove coverage.
Mounting Type: Wall mount
Wall mounting saves counter space and keeps the faucet out of the way of cooking activities. You install it directly into the wall, which requires a single-hole configuration. This setup is ideal for kitchens with limited countertop real estate. Check your wall structure before installation to ensure it can support the weight and water pressure.
Hole Configuration: 1-hole
A single-hole installation simplifies the mounting process compared to multi-hole deck faucets. You only need to drill or use one existing hole in your wall. This reduces the complexity of the plumbing work. Ensure your wall space aligns with this single-inlet requirement before purchasing, as retrofitting may be difficult if you need multiple holes.
Design and build details
According to the listing, this Havin pot filler is constructed from stainless steel with a black finish. The model, A902B, weighs 3.53 pounds. This weight suggests a solid feel on your wall, though you should verify your mounting surface can support the load. The faucet features a dual-handle control system. You operate hot and cold water separately using these handles. The internal ceramic valves provide smooth turning action. This design aims to prevent dripping over time. The listing includes a spare cartridge for future replacement if the aerator leaks.
The layout is distinct. The water spout sits below the main pipe body. This upside-down geometry helps clear low cabinets and standard kitchen storage. You can mount it using a single hole in the wall. The spout is a dual-jointed swing arm that rotates 360 degrees. This range lets you reach pots on stoves behind or to the side of the sink. The flow rate is 2.2 gallons per minute at 60 psi. This high flow fills large pots quickly. The inlet threads are 1/2 NPT, which fits standard US plumbing. A flange adds stability during installation. You can choose from four color options, including brushed nickel and gold, to match your kitchen hardware.
Setup and daily operation guide
Installation requires a single hole in your wall. The unit mounts directly to the surface using the included flange for stability. You must ensure your wall can support the 3.53-pound weight. The faucet connects via standard 1/2 NPT threads on both sides, which fits typical US plumbing standards. This setup allows you to position the faucet above your cooking area without complex piping modifications.
Daily use centers on the dual-handle controls. You operate hot and cold water independently using separate handles. Each handle turns a ceramic valve, providing smooth action and precise flow control. This design helps prevent dripping when you turn the water off. The faucet delivers 2.2 gallons per minute at 60 psi, allowing you to fill large pots quickly. You can use it for hot water, cold water, or both simultaneously.
The unique upside-down design places the water spout below the main body. This geometry helps clear low-hanging cabinets, letting you lift tall pots directly under the stream. The spout features a dual-jointed swing arm that rotates 360 degrees. This range lets you position the water flow over different burners or areas of your stovetop. The listing includes a spare ceramic cartridge for future maintenance. If the aerator leaks after years of use, you can replace the internal valve. This feature extends the lifespan of the fixture without requiring a full replacement.
Who Should Skip This Pot Filler
This Havin pot filler is designed for specific kitchen layouts where cabinet clearance is tight. You should verify that your tallest pots fit under the inverted spout, as the water outlet sits below the main body. The dual handles allow you to control hot and cold water separately, which is useful if you only need one temperature for filling. Since it is a single-hole mount, you need an existing opening in your wall. The 1/2 NPT threads fit standard US plumbing, but you must check your supply line connections. The ceramic valves are durable, yet you have a spare cartridge included for future maintenance. This model weighs 3.53 pounds, so ensure your wall anchors can support the load. Unlike side-swing fillers, this design prioritizes vertical clearance over horizontal reach. If your cabinets hang low, this inverted geometry helps you avoid collisions. However, if you need to fill pots near the edge of the counter, the fixed arm length might limit your reach. Compare this to other options in our 1 product guide to see if a longer swing arm better suits your workflow. Regular cleaning of the aerator will maintain flow rate.
Check before you buy
- Verify your tallest pots clear the low spout height
- Confirm your wall has a single pre-drilled hole
- Check that your supply lines match 1/2 NPT threads
- Ensure your wall anchors support the 3.53-pound weight
The product at a glance
Havin Upside Down Wall Mount Pot Filler
Best for: Low overhead cabinet clearance
- Mounting Type
- Wall Mount
- Faucet Type
- Pot Filler
- Control Type
- Dual Handles
- Hole Configuration
- One Hole
- Spout Swivel
- 360°
- Valve Type
- ceramic
View on Amazon: Havin Upside Down Wall Mount Pot Filler Affiliate link
This Havin pot filler uses an upside-down design where the spout sits below the body to clear low cabinets. It features dual ceramic handles for precise control and a 360-degree dual-jointed swing arm. The faucet delivers 2.2 gpm at 60 psi for fast filling. It mounts to a single wall hole and includes a spare cartridge. This model is ideal for kitchens where overhead clearance is limited.
Pros
- Upside-down spout design fits under low cabinets
- 360-degree dual jointed swing spout for reach
- Dual ceramic valve handles prevent dripping
- 2.2 gpm flow rate fills large pots quickly
- Includes spare cartridge for long-term maintenance
Cons
- Only one hole configuration for installation
- Single color option in this listing
- No hot and cold mixing capability mentioned
Good fit if
- You have low overhead cabinets blocking standard fillers
- You need a single-hole wall mount solution
- You want a spare cartridge for future repairs
Skip if
- You require a hot and cold mixing faucet
- You need a multi-hole mounting configuration
- You prefer a standard spout above the pipe
Verdict: Havin Black Wall Mount Pot Filler suits kitchens with low overhead cabinets due to its unique upside-down spout placement. It offers reliable flow and reach for users needing a single-hole wall mount.
Specifications side by side
| Spec | Havin Upside Down Wall Mount Pot Filler |
|---|---|
| Mounting Type | Wall Mount |
| Faucet Type | Pot Filler |
| Control Type | Dual Handles |
| Hole Configuration | One Hole |
| Spout Swivel | 360° |
| Valve Type | ceramic |
| Installation Type | Wall Mount |
| Features | Pot Filler |
| Color | Black |
| Weight | 3.53 pounds |
| Model | A902B |
Frequently asked questions
Is the Havin pot filler suitable for low overhead cabinets?
Yes, this model is specifically designed for kitchens with low overhead cabinets. The inverted spout placement positions the water outlet below the main body, maximizing vertical clearance. This unique geometry allows you to use the faucet without hitting upper storage units, making it ideal for tight spaces.
Does this Havin faucet require a single hole for installation?
Yes, the Havin Upside Down Wall Mount Pot Filler requires a single hole for installation. It mounts directly to the wall surface using the included flange for stability. You must ensure your wall can support the unit's weight, which is listed at 3.53 pounds for the black model.
What is the weight of the Havin A902B pot filler?
The Havin A902B pot filler weighs 3.53 pounds. This weight suggests a solid feel on your wall, though you should verify your mounting surface can support the load. The stainless steel construction with a black finish contributes to this heft, providing a sturdy presence in your kitchen.
What type of valves does the Havin pot filler use?
The Havin pot filler uses dual ceramic valves for shut-off. Ceramic valves are durable and resist wear better than rubber washers. You get smooth handle operation and reliable shut-off. This design helps prevent dripping over time, which is beneficial if you plan to use the faucet daily.
Can I control hot and cold water separately on this model?
Yes, the dual handles on this Havin pot filler allow you to control hot and cold water separately. This setup gives you precise temperature adjustment. The ceramic internals ensure smooth operation for both handles, helping you maintain consistent water flow without sudden temperature shifts during use.
What connection size is required for the Havin pot filler?
The faucet connects via standard 1/2 NPT threads on both sides. This fits typical residential plumbing connections found in most kitchens. You should verify that your existing supply lines match this thread size before installation to ensure a secure fit without needing adapters or additional fittings.
Is the Havin pot filler available in a black finish?
Yes, the Havin Upside Down Wall Mount Pot Filler is available in a black finish. The stainless steel construction is coated with this color option. This finish provides a modern look that complements various kitchen styles, including those with dark fixtures or matte black hardware.