Kichae 28 Undermount Kitchen Sink Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This kichae 28 undermount kitchen sink review focuses on the Kichae 28 in Workstation Sink. It is a single-bowl unit built from 16-gauge SUS304 stainless steel. The basin measures 28 by 18 by 9 inches. These dimensions define its capacity and footprint. You get a workstation design with front and back ledges. This track system holds included accessories like a cutting board and colander. The sink installs below the counter edge. It requires a minimum 31-inch base cabinet. The package includes a drain assembly and bottom rinse grid. This setup aims to streamline food prep and cleaning tasks.
What stands out
- 16-gauge SUS304 stainless steel construction for durability
- 28 by 18 by 9 inch single bowl capacity
- Front and back workstation ledges for accessory tracks
- 10mm radius inside corners for easier cleaning
- Anti-condensation undercoating and sound reduction padding
Who it fits
Good fit for
This sink suits cooks who value a large, single workspace. The 28-inch length accommodates big pots and baking sheets. The workstation ledges allow you to use the cutting board or colander directly over the basin. If you have a 31-inch or larger cabinet, this undermount model fits well. The quieting pads and insulation help reduce noise during use. You will appreciate the included accessories if you want an all-in-one prep station without buying separate parts.
Who should skip it
You should look elsewhere if you need a double-bowl layout. This model offers only one large basin. It also requires a minimum 31-inch cabinet width. Smaller cabinets will not accommodate the 28-inch sink. If you prefer a top-mount installation, this undermount design is not compatible. Additionally, the workstation accessories are specific to the included track system. You cannot use third-party rails or generic accessories with this specific ledge design.
Verdict: The Kichae 28 in Workstation Sink provides a spacious, single-bowl layout with integrated prep tracks. It is a solid choice for large kitchens with adequate cabinet space.
Key specs explained
Material: SUS304 stainless steel
This grade of steel contains chromium and nickel, which resist rust and corrosion. You get a durable surface that handles daily kitchen wear. It is the standard for quality sinks. This material ensures the sink remains hygienic and looks new for years. It is a reliable choice for busy households.
Steel Gauge: 16 Gauge
Gauge measures thickness. A lower number means thicker steel. At 16 gauge, this sink is sturdy and less prone to denting. Thinner sinks often feel flimsy and make more noise. This thickness provides a solid feel. It offers better durability for heavy pots and pans.
Bowl Configuration: Single Bowl
A single large basin offers ample space for washing large items. You can fit big baking sheets or pots easily. Double bowls split the space, limiting what you can wash at once. This configuration is ideal for those who prioritize capacity over separation. It simplifies cleaning large loads efficiently.
Installation Type: Undermount
This sink mounts below the countertop edge. It creates a seamless look and allows you to wipe debris directly into the basin. It is easier to clean the counter surface without a rim obstructing you. This style requires a compatible countertop material. It offers a modern, streamlined aesthetic for your kitchen.
Exterior Dimensions: 28 x 18 x 9 inches
These measurements define the physical footprint and depth. The 28-inch length fits standard cabinet sizes. The 9-inch depth provides room for tall items. You must ensure your cabinet base is at least 31 inches wide. Accurate dimensions help you plan the layout. They determine if the sink fits your existing cabinetry.
Design and build details
According to the listing, this sink is crafted from 16-gauge SUS304 stainless steel. This specific gauge offers a balance of strength and weight. The 16-gauge thickness helps resist denting during heavy use. The material choice supports a commercial-grade satin finish. This finish is designed to be corrosion and rust-resistant. It also simplifies cleaning, which is practical for busy kitchens. The surface remains hygienic over time with minimal effort.
The basin layout is a single bowl with a 9-inch depth. The exterior dimensions are 28 by 18 inches. This size requires a minimum 31-inch base cabinet for proper installation. The undermount style provides a seamless look against your countertop. The basin features R10-unique 10mm radius inside corners. These curved corners retain a modern aesthetic while allowing for easier cleaning compared to sharp angles. The deep bowl accommodates large pots and trays.
A key design element is the workstation ledge system. Ledges on the front and back provide a track for accessories. This allows you to switch between a cutting board mode or a separate sink mode. The included parts are customized to fit this specific track. The sink also includes a 3.5-inch standard draining hole for garbage disposal installation. This integrated ledge system maximizes workspace without expanding the sink's footprint.
Setup and everyday use
Installation requires a base cabinet with a minimum width of 31 inches. This ensures the 28-inch external footprint fits correctly with proper clearance. The unit mounts as an undermount sink, meaning it attaches beneath the countertop edge. You must drill a standard 3.5-inch drain hole if you plan to install a garbage disposal. The listing includes all necessary hardware, such as installation clips and a drain assembly, to support this setup.
Daily use centers on the workstation design. Ledges run along the front and back of the basin. These tracks allow you to slide accessories into place. The package includes a cutting board, colander, and roll-up rack. You can position these items to create a prep station or clear the basin for washing large pots. The single-bowl configuration offers ample space for soaking or rinsing. The 9-inch depth provides room for bulky items without splashing.
Maintenance is straightforward. The SUS304 steel resists rust and corrosion. A commercial-grade satin finish helps hide minor scratches and fingerprints. The bottom rinse grid protects the steel surface from dents and scratches during heavy use. For cleaning, the R10-radius corners offer a slight curve. This design eliminates sharp angles where food particles might accumulate, making the basin easier to wipe down. The anti-condensation undercoating also helps protect your cabinetry from moisture damage during routine use.
Before you buy this sink
This workstation sink includes a cutting board, colander, and roll-up rack. These accessories fit the front and back ledges. You can switch between prep and sink modes easily. However, you must verify your cabinet width. The listing recommends a 31-inch base cabinet for the 28-inch unit. This clearance ensures proper undermount installation. You also need a standard 3.5-inch drain hole for a garbage disposal. The sink uses thick rubber pads and anti-condensation undercoating. This insulation reduces noise and protects your cabinetry from moisture. Keep in mind that this is a single bowl. It lacks a second basin for drying or rinsing. If you prefer dual bowls, look elsewhere. This model suits those who value prep space over extra washing capacity. Pair it with your existing faucet and disposal. Check that your countertop edge allows for undermount mounting. The satin finish resists corrosion and is easy to clean. Regular wiping maintains the commercial-grade look. This sink fits well in busy kitchens where prep area matters.
Check before you buy
- Verify your base cabinet is at least 31 inches wide.
- Ensure you have a 3.5-inch drain hole for disposal.
- Confirm your countertop supports undermount installation.
- Check if the included accessories meet your prep needs.
The product at a glance
Kichae 28 in Workstation Sink
Best for: Single-bowl workstation setups in 31-inch cabinets
- Installation Type
- Undermount
- Material
- SUS304 Stainless Steel
- Exterior Dimensions
- 28 x 18 inches
- Minimum Cabinet Size
- 31 inches
- Steel Gauge
- 16 Gauge
- Workstation Ledge
- Integrated Track
View on Amazon: Kichae 28 in Workstation Sink Affiliate link
This Kichae sink is a 28 by 18 by 9 inch single-bowl unit made from 16-gauge SUS304 stainless steel. It features undermount installation and workstation ledges on the front and back. The package includes a cutting board, colander, and rollup rack. Thick rubber pads and anti-condensation undercoating help reduce noise and protect your cabinet. It requires a minimum 31-inch base cabinet.
Pros
- 16-gauge SUS304 stainless steel construction for durability
- Workstation ledges support included accessories like a cutting board
- Sound reduction technology with thick rubber pads
- Anti-condensation undercoating protects cabinetry
- Single bowl configuration maximizes interior space
Cons
- Requires a minimum 31-inch base cabinet for installation
- Single bowl design limits separate washing and rinsing zones
- No mention of a built-in drainboard or integrated faucet
Good fit if
- You have a 31-inch or larger base cabinet
- You want a workstation sink with included accessories
- You prefer a single-bowl layout for large cookware
Skip if
- You need a double-bowl configuration
- Your base cabinet is smaller than 31 inches
- You require a top-mount installation style
Verdict: Kichae 28 Inch Undermount Workstation Sink is a solid option for those with a 31-inch cabinet who want a spacious single bowl with included workstation accessories. It offers practical noise reduction and durable 16-gauge steel for everyday kitchen tasks.
Specifications side by side
| Spec | Kichae 28 in Workstation Sink |
|---|---|
| Installation Type | Undermount |
| Material | SUS304 Stainless Steel |
| Exterior Dimensions | 28 x 18 inches |
| Minimum Cabinet Size | 31 inches |
| Steel Gauge | 16 Gauge |
| Workstation Ledge | Integrated Track |
| Bowl Configuration | Single Bowl |
| Target Space | Kitchen |
| Features | Workstation |
| Color | Stainless Steel |
| Gauge | 16 Gauge |
| Dimensions | 28 × 18 × 9 inches |
| Size | 28"x18"x9" |
| Model | KIC-281809-SS |
Frequently asked questions
What is the exact size of the Kichae 28 undermount sink?
The basin measures 28 inches in length, 18 inches in width, and 9 inches in height. These external dimensions define the overall footprint and internal capacity of the unit. You should verify that your cabinet provides adequate clearance for this specific size before installation.
Does this sink include accessories for food preparation?
Yes, the workstation design includes a cutting board, a colander, and a roll-up rack. These accessories fit onto the front and back ledges of the sink. This setup allows you to switch easily between washing and prep modes without needing extra counter space.
What gauge steel is used in this Kichae sink?
The sink is constructed from 16-gauge stainless steel. This specific thickness offers a balance of strength and weight, helping to resist denting during heavy use. The 16-gauge material supports the durable, commercial-grade satin finish found on this model for long-term kitchen durability.
What type of installation is required for this unit?
This unit is designed for undermount installation, meaning it attaches beneath the countertop edge. You must drill a standard 3.5-inch drain hole for proper plumbing. The sink requires a base cabinet with a minimum width of 31 inches to fit correctly.
Is the Kichae 28 sink suitable for a 30-inch cabinet?
No, the listing recommends a 31-inch cabinet width for this specific model. The 28-inch external footprint requires proper clearance to fit correctly within the base cabinet. Using a smaller cabinet may prevent proper installation or limit access to the sink basin.
What is the model number for this Kichae workstation sink?
The model number is KIC-281809-SS. This identifier corresponds to the 28-inch single-bowl workstation sink in stainless steel. You can use this number to verify compatibility with your kitchen layout or to find replacement accessories that match the specific dimensions of this unit.
How does the workstation design improve daily kitchen tasks?
The integrated ledges allow you to place accessories like the included colander and cutting board directly over the basin. This maximizes workspace and keeps prep items within reach. You can efficiently move from chopping to rinsing without cluttering your countertop with extra tools.