Kingo HOME 33x22 Drop-In Brushed Nickel Alternatives: 6 Similar Picks Compared

Alternatives to Kingo HOME Sink

VAPSINT 33-Inch Drop-In Stainless Steel Sink

The VAPSINT model uses 16-gauge steel, which is thicker and more durable than the Kingo HOME’s 18-gauge construction. Both sinks share the same 33x22-inch footprint and drop-in installation style. The VAPSINT is better suited for heavy-duty environments like laundry rooms or RVs where impact resistance matters more than acoustic comfort. It lacks the specific soundproofing pads found in the Kingo, but the heavier gauge reduces vibration noise naturally. If you prioritize long-term structural integrity over quiet operation, this thicker steel is a practical upgrade. It fits the same standard cabinet space but offers a more robust basin for tough cleaning tasks.

Bokaiya 21x20 16-Gauge Workstation Sink

This Bokaiya sink is significantly smaller at 21x20 inches, making it ideal for compact counters where the Kingo’s 33-inch length would be overwhelming. It features 16-gauge steel, providing greater durability than the Kingo’s 18-gauge body. The design includes workstation ledges for accessories, a feature the Kingo does not offer. While it sacrifices basin volume, it gains utility through integrated prep space. The 10-inch depth is slightly deeper than the Kingo’s 9-inch bowl. You should choose this if you need a heavy-duty sink in a tight footprint. It is not a direct size replacement but a functional alternative for smaller kitchens or bars that require thick steel and accessory support without the large exterior dimensions.

Herogo 25x22 Drop-In Sink

The Herogo sink is narrower at 25x22 inches, fitting cabinets smaller than the Kingo’s required 36-inch minimum. It includes a faucet combo, whereas the Kingo only provides drain accessories. This makes the Herogo a complete solution for tight spaces like RVs or small bars. The 10-inch depth matches the Bokaiya but is deeper than the Kingo’s 9-inch bowl. It lacks the soundproofing pads and thick 3mm edge of the Kingo. You should pick this if you need a faucet included and have limited counter space. It gives up the large single-bowl capacity of the Kingo but offers a ready-to-install package for smaller applications where a full-size sink cannot fit.

ATTOP 33-Inch Drop-In Single Bowl Sink

The ATTOP sink matches the Kingo’s 33x22-inch exterior dimensions and drop-in style. However, it uses 20-gauge steel, which is thinner and less durable than the Kingo’s 18-gauge construction. The ATTOP features a rear drain placement, which can be advantageous for fitting large pots, while the Kingo has a standard center drain. It lacks the soundproofing pads and undercoating of the Kingo. You should choose the Kingo for better noise reduction and thicker steel. The ATTOP is a viable alternative only if you prioritize a rear drain layout and do not mind thinner metal. It offers similar capacity but compromises on material thickness and acoustic dampening features found in the original.

SHACO 22x18 Brushed Nickel Drop-In Sink

The SHACO sink is much smaller at 22x18 inches, designed for compact bars or secondary prep sinks. It uses 16-gauge steel, which is thicker and more robust than the Kingo’s 18-gauge body. The SHACO lacks the large basin volume of the Kingo but offers superior material durability in a small footprint. It is not suitable for primary kitchen washing tasks that require the Kingo’s 33-inch length. You should pick this for small spaces where the Kingo is too large. It provides efficient drainage and easy maintenance in a compact form. The trade-off is significant loss of basin space, but you gain thicker steel and a design optimized for tight areas rather than large-scale cleaning.

Kraus Fairlane 15-Inch Stainless Steel Drop-In Sink

The Kraus Fairlane is a compact 15-inch sink, far smaller than the Kingo’s 33-inch basin. It uses 18-gauge steel, matching the Kingo’s material thickness. This sink is designed for secondary use in bars or small kitchens where a full-size sink is unnecessary. It lacks the large single-bowl capacity and soundproofing features of the Kingo. You should choose this if you need a durable, small sink for a specific task rather than a primary washing station. It fits in tight spaces where the Kingo cannot go. The Kraus offers sturdy construction in a miniature form, sacrificing all large-bowl utility for compactness and targeted durability in secondary locations.

Quick picks

Our 7 picks

1 Best overall

Kingo HOME 33x22 Drop-In Brushed Nickel Sink

Best for: Large single-bowl kitchen tasks

Installation Type

Drop-in, Top Mount

Material

T-304 Stainless Steel

Exterior Dimensions

33" x 22"

Bowl Depth

9"

Minimum Cabinet Size

36"

Steel Gauge

18 Gauge

View on Amazon: Kingo HOME 33x22 Drop-In Brushed Nickel Sink Affiliate link

This Kingo HOME sink offers a 33 by 22 inch footprint with a single bowl configuration. It features 18-gauge T-304 stainless steel construction and a 9-inch bowl depth. The drop-in design fits standard 36-inch cabinets. You get included drain accessories and soundproofing pads. This model suits kitchens needing a large, durable workspace with straightforward top-mount installation.

Pros

• 18-gauge T-304 stainless steel body
• 9-inch deep single bowl
• Includes drain accessories
• Soundproof rubber dampening pads

Cons

• Requires a minimum 36-inch base cabinet
• Drop-in style covers countertop edge
• Single bowl limits separate task zones

Good fit if

• You have a 36-inch cabinet opening
• You prefer deep bowls for large pots
• You want included drain hardware

Skip if

• You need a double bowl configuration
• Your cabinet is smaller than 36 inches
• You prefer undermount installation

Verdict: Kingo HOME 33x22 Single Bowl Sink provides ample space and durable 18-gauge steel for heavy kitchen use. It fits users with standard 36-inch cabinets who prioritize depth and included hardware.

2 Also great

VAPSINT 33-Inch Drop-In Stainless Steel Sink

Best for: RVs and laundry rooms needing durable single bowl

Installation Type

Drop-In

Material

SUS304 Stainless Steel

Exterior Dimensions

33" x 22"

Bowl Depth

9"

Steel Gauge

16 Gauge

Bowl Configuration

Single Bowl

View on Amazon: VAPSINT 33-Inch Drop-In Stainless Steel Sink Affiliate link

This VAPSINT drop-in sink is built from 16-gauge SUS304 stainless steel with a brushed nickel finish. It measures 33 by 22 inches with a 9-inch bowl depth. The X-shaped drainage slope ensures quick water removal. Soundproofing pads and anti-condensation coating reduce noise and moisture. Its size and durability make it a strong option for RVs, laundry rooms, or prep areas.

Pros

• 16-gauge SUS304 stainless steel construction resists dents and corrosion
• 33x22 inch exterior size fits standard cabinetry
• X-shaped drainage design channels water efficiently
• 3mm soundproofing pads reduce operational noise
• Anti-condensation coating protects surrounding cabinetry

Cons

• Single bowl configuration limits simultaneous washing and rinsing
• 9-inch bowl depth may be shallow for large pots
• Brushed nickel finish shows water spots more than standard stainless

Good fit if

• You need a durable sink for an RV or compact kitchen
• You want a single bowl with quick drainage for prep work
• You prefer a brushed nickel finish for modern decor

Skip if

• You require a double bowl for multitasking
• You need a deeper bowl for large cookware
• You prefer a standard stainless steel finish

Verdict: VAPSINT 33x22 Single Bowl Sink offers robust 16-gauge steel and efficient drainage for RVs and laundry rooms. It suits users prioritizing durability and quick drying over multitasking capacity.

3 Best premium

Bokaiya 21x20 16-Gauge Workstation Sink

Best for: compact spaces needing thick 16-gauge workstation steel

Installation Type

Drop-In

Material

T304 Stainless Steel

Exterior Dimensions

21" x 20"

Bowl Depth

10"

Steel Gauge

16 Gauge

Workstation Ledge

Single-tier

View on Amazon: Bokaiya 21x20 16-Gauge Workstation Sink Affiliate link

This drop-in sink gives you heavy-duty 16-gauge T-304 stainless steel construction in a compact 21 by 20-inch footprint. A 10-inch bowl depth provides vertical soaking room for deep pots, while integrated interior ledges hold an included cutting board. It fits your setup if you want thicker steel and workstation accessories for a smaller kitchen or bar space.

Pros

• Thick 16-gauge T-304 stainless steel construction
• Workstation step ledges hold sliding accessories
• 10-inch deep bowl for soaking tall cookware
• Comes with cutting board, bottom grid, and drain basket

Cons

• Measures 21 by 20 inches, smaller than standard 33-inch cutouts
• Single-bowl layout lacks a divided prep section

Good fit if

• You want heavy 16-gauge steel rather than standard 18-gauge metal.
• You need built-in workstation ledges in a compact counter space.
• You prefer a 10-inch deep basin for soaking large cookware.

Skip if

• You need a full-width 33 by 22-inch sink to cover an existing cutout.
• You require a double-bowl sink configuration.

Verdict: Bokaiya 21x20-Inch 16-Gauge Workstation Sink suits buyers who need durable 16-gauge steel and accessory ledges for a compact counter footprint.

4 Best farmhouse

Herogo 25x22 Drop-In Sink

Best for: small cabinets needing a faucet

Installation Type

Drop In

Material

18/10 Stainless Steel

Exterior Dimensions

25" x 22"

Bowl Depth

10"

Minimum Cabinet Size

28 inch

Workstation Ledge

Workstation

View on Amazon: Herogo 25x22 Drop-In Sink Affiliate link

This Herogo sink measures 25 by 22 inches with a 10-inch depth. It uses 18/10 stainless steel and includes a faucet combo. The brushed nickel finish resists scratches. Anti-condensation coating reduces noise. You need a 28-inch cabinet. It fits RVs or bars. The accessories help with drying and drainage. This is a complete drop-in unit for smaller spaces.

Pros

• Includes faucet, bottom grid, and soap dispenser
• 18/10 stainless steel construction
• 10-inch deep bowl
• Anti-condensation acoustic coating

Cons

• Smaller 25x22 inch footprint
• Requires 28-inch minimum cabinet
• Lower 1.7 gpm faucet flow

Good fit if

• You need a faucet included
• You have a 28-inch cabinet
• You want a deep single bowl

Skip if

• You need a 33-inch width
• You prefer undermount installation
• You want a standard 2.2 gpm faucet

Verdict: Herogo 25x22 Drop-In Sink fits tight spaces with a full accessory kit. It suits RVs or bars where a 28-inch cabinet exists.

5 Best stainless steel

ATTOP 33-Inch Drop-In Single Bowl Sink

Best for: Large single-bowl washing with rear drain placement

Installation Type

Drop-In, Topmount

Material

Stainless Steel

Exterior Dimensions

33" x 22"

Bowl Depth

9"

Steel Gauge

20 Gauge

Bowl Configuration

Single Bowl

View on Amazon: ATTOP 33-Inch Drop-In Single Bowl Sink Affiliate link

The ATTOP 33x22 drop-in sink offers a large single bowl for standard kitchen setups. It features 20-gauge stainless steel construction with a nano coating to resist scratches and oil stains. The 9-inch depth provides ample space for tall pots. Rear drain placement keeps dishes clear of the drain. Heavy-duty undercoating helps reduce noise and condensation during use.

Pros

• 33 x 22 inch exterior dimensions fit standard cutouts
• 20-gauge stainless steel bowl with 3.0mm edge plate
• Nano coating resists scratches, oil, and floating rust
• Rear drain placement prevents dishes from settling on the drain
• Heavy-duty sound guard and rubber padding reduce noise

Cons

• 20-gauge steel is thicker than the 18-gauge options on this list
• Drop-in installation requires a countertop cutout
• Single bowl configuration limits separate washing and rinsing zones

Good fit if

• You need a large 33-inch basin for bulky cookware
• You prefer a rear drain to keep dishes out of the way
• You want a nano-coated surface for easier cleaning

Skip if

• You require an 18-gauge steel thickness for maximum durability
• You need a double bowl for simultaneous washing and rinsing
• You are installing a top-mount sink without a cutout

Verdict: ATTOP 33x22 Drop-In Kitchen Sink is a solid choice for those prioritizing a large, easy-to-clean basin with a rear drain, though the 20-gauge steel is less robust than the 18-gauge alternatives.

6 Best budget

SHACO 22x18 Brushed Nickel Drop-In Sink

Best for: compact bars or prep sinks

Installation Type

Drop In, Topmount

Material

Stainless Steel

Exterior Dimensions

22" x 18"

Bowl Depth

9"

Steel Gauge

16 Gauge

Bowl Configuration

Single Bowl

View on Amazon: SHACO 22x18 Brushed Nickel Drop-In Sink Affiliate link

The SHACO 22x18 is a single-bowl drop-in sink made from 16-gauge stainless steel with a brushed nickel finish. Its 9-inch bowl depth and 20x14-inch interior provide ample space for washing. The X-shaped groove and sunken bottom ensure efficient drainage without pooling. Rubber mute pads reduce noise, while the R10 curved surface simplifies cleaning. This model suits those needing a durable, easy-to-maintain bar or prep sink.

Pros

• 16-gauge stainless steel construction for durability and rust resistance
• X-shaped groove and sunken bottom design for quick water drainage
• Rubber mute pads effectively reduce water flow noise
• R10 smooth curved surface allows for simple maintenance and cleaning

Cons

• 22x18 inch exterior size is smaller than the 33x22 inch standard
• Single bowl configuration limits simultaneous washing and rinsing
• 9 inch bowl depth may be shallow for large pots

Good fit if

• You need a compact sink for a bar, outdoor kitchen, or prep area
• You prefer a brushed nickel finish that resists fingerprints
• You want a drop-in installation that is easy to clean

Skip if

• You require a 33x22 inch sink to match your countertop cutout
• You need a double bowl for separating washing and rinsing tasks
• You prefer a deeper bowl for handling large cookware

Verdict: SHACO 22x18 Brushed Nickel Drop-In Sink is a compact, durable option for smaller kitchens or secondary prep spaces. Its 16-gauge steel and efficient drainage make it a practical choice for users who prioritize easy maintenance and noise reduction over large capacity.

7 Best 18 gauge

Kraus Fairlane 15-Inch Stainless Steel Drop-In Sink

Best for: compact bar or secondary kitchen sinks

Installation Type

Drop In/Top Mount

Material

Stainless Steel

Exterior Dimensions

15” L x 15” W

Bowl Depth

7 5/8”

Minimum Cabinet Size

18”

Steel Gauge

18-Gauge

View on Amazon: Kraus Fairlane 15-Inch Stainless Steel Drop-In Sink Affiliate link

This Kraus Fairlane is a 15-inch drop-in bar sink made from 18-gauge stainless steel. It features a single bowl with a depth of 7 5/8 inches. The exterior measures 15 by 15 inches and requires an 18-inch minimum cabinet size. You will get a protective bottom grid and drain assembly with the unit. The sloped bottom helps prevent water pooling.

Pros

• 18-gauge stainless steel construction resists dents and corrosion
• Sloped bottom with channel grooves aids drainage
• Includes protective bottom grid and drain assembly
• Beveled edge simplifies cleanup

Cons

• Small 15-inch footprint limits capacity for large cookware
• Only one pre-drilled hole for faucet installation
• Requires an 18-inch minimum cabinet size

Good fit if

• You need a compact sink for a bar or small kitchen
• You want a durable 18-gauge steel option
• You prefer easy drop-in installation

Skip if

• You need a standard 33-inch main kitchen sink
• You require multiple faucet holes
• You have only a 15-inch cabinet opening

Verdict: Kraus Fairlane 15-Inch Bar Sink is a sturdy, compact choice for secondary sinks. It fits well in tight spaces where a full-size sink does not belong.

Specifications side by side

Frequently asked questions