Kingston Brass Kingston KS3702RKZ Deck Mount Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This kingston brass kingston ks3702rkz deck mount review focuses on a solid brass pot filler designed for heavy kitchen use. It features a single-hole deck mount configuration that simplifies installation on your countertop or backsplash. The faucet delivers a 3.0 GPM flow rate, ensuring efficient filling without excessive water waste. Its 20-inch arm length provides ample reach over large pots. This model combines durability with practical functionality, making it a reliable choice for serious cooks who need a dedicated filling station near their range.
What stands out
- Solid brass construction for long-term durability
- 20-inch arm length for wide pot coverage
- Drip-free ceramic disc cartridge prevents leaks
- 3.0 GPM flow rate at 60 PSI
- Single-hole deck mount installation
Who it fits
Good fit for
This faucet suits cooks who frequently fill large stockpots or kettles. The 20-inch reach helps you position water directly over deep pans without splashing. The solid brass body withstands frequent handling and heavy use. If you prefer a dedicated filling station rather than using your main sink faucet, this deck mount unit fits well. The ceramic disc valve ensures consistent performance over time, which matters for daily kitchen tasks.
Who should skip it
Look elsewhere if you need a faucet with multiple spray modes. This model offers a single stream only. You might also skip this if you require a wall-mount option, as this is strictly deck mount. The 3.0 GPM flow rate is standard, not high-volume. If you want a pull-down or pull-out head for flexible rinsing, this fixed-arm design will not meet your needs. It is purely for filling pots.
Verdict: The Kingston Brass KS3702RKZ is a sturdy, no-frills pot filler built for durability and reach. It delivers reliable performance for filling large cookware without the complexity of advanced features.
Key specs for this pot filler
Valve Type: Ceramic disc
This valve uses two ceramic plates to control water flow. It prevents dripping even after many years of use. You get reliable performance without internal wear. This is better than rubber washers that degrade over time. It ensures a tight seal every time you turn the handle. Choose this if you want low maintenance and long-term durability for your kitchen faucet.
Flow Rate: 3.0 GPM
The faucet delivers three gallons of water per minute at sixty PSI. This is the standard flow rate for most residential faucets. It fills large pots quickly without wasting excessive water. You get efficient rinsing and filling speeds. Compare this to low-flow models that take longer. It balances speed with water conservation for everyday cooking tasks.
Mounting Type: Deck mount
This faucet installs directly onto your countertop or backsplash. It requires a single hole for installation. This setup saves space compared to wall-mounted units. You do not need to drill into the wall. It is easier to service and repair. Choose this if you prefer a clean look on your counter surface and simple installation.
Construction: Solid brass
The body is made from solid brass, not plastic. This material resists corrosion and lasts longer. It provides a heavy, sturdy feel during use. You avoid the creaking or loosening common in lighter materials. It withstands daily kitchen wear and tear. Select this for a faucet that maintains its structure and appearance over many years.
Design and build details
According to the listing, the Kingston Brass KS3702RKZ uses solid brass construction. This material choice suggests high durability for daily kitchen tasks. The faucet weighs 8.45 pounds, which helps keep it stable during use. Its dimensions are 20 inches long, 2.38 inches wide, and 18.7 inches high. This size allows the spout to reach over large pots on your stove without obstruction. The single-hole deck mount design simplifies installation on your countertop or backsplash. You only need one hole for the fixture, reducing drilling work.
The finish is polished brass. This option provides a warm, reflective look that stands out in modern or traditional kitchens. The listing notes six finish variations, including matte black and brushed nickel, if you prefer a different aesthetic. Controls are managed by a drip-free ceramic disc cartridge. This valve type uses two ceramic plates to regulate water flow. It prevents leaks even after many cycles, offering better longevity than rubber washers. The spout delivers a 3.0 GPM flow rate at 60 PSI. This ensures efficient filling without excessive splashing. The 1/2-14 NPSM connection fits standard plumbing lines. This design prioritizes sturdy build quality and practical functionality for heavy cooking needs.
Setup and everyday use details
Installation requires a single hole in your deck or backsplash. The deck mount design simplifies the process by reducing the number of holes you need to drill. You must ensure your plumbing connections match the 1/2-14 NPSM standard. This thread size is common in residential kitchens, but you should verify your existing lines before starting. The solid brass construction adds weight, coming in at 8.45 pounds. This mass helps keep the faucet stable when you extend or retract the arm. It does not wobble easily during operation.
Daily use centers on filling heavy pots. The 20-inch length provides reach over deep cookware. You can position large stockpots under the spout without strain. The 3.0 GPM flow rate at 60 PSI fills water quickly. This volume is efficient for filling large volumes without waiting. The ceramic disc valve ensures the water stops immediately when you turn the handle. This drip-free performance keeps your counter dry. You avoid the mess of slow leaks common in older faucets.
The polished brass finish resists tarnish better than untreated metal. You can wipe it clean with a soft cloth. The 18.7-inch height allows clearance for tall pots. You do not need to lift heavy cookware high to place it under the spout. The compact width of 2.38 inches keeps the fixture from protruding too far into your workspace. This design balances reach with a smaller footprint.
Before You Buy This Pot Filler
This Kingston Brass KS3702RKZ is a specialized tool for heavy cooking. You need a sturdy countertop or backsplash to support its 8.45-pound weight and 20-inch reach. Verify that your existing plumbing matches the 1/2-14 NPSM connection standard before purchasing. The single-hole deck mount design simplifies installation, but you must ensure the hole size fits the base. Regular cleaning with appropriate brass polish maintains the polished finish. Avoid abrasive cleaners that damage the surface. This pot filler complements your main dishwasher by handling large pots directly at the sink. It reduces trips to the dishwasher for pre-rinsing. Consider this if you cook frequently with bulky cookware. It does not replace your primary faucet or dishwasher. It adds convenience for specific tasks. Check the available finishes like matte black or brushed nickel if the polished brass does not match your kitchen decor. Ensure your cabinet space allows for the full extension of the spout.
Check before you buy
- Verify 1/2-14 NPSM plumbing compatibility.
- Ensure countertop supports 8.45-pound weight.
- Confirm single-hole deck mount space.
- Check spout clearance for large pots.
The product at a glance
Kingston Brass KS3702RKZ Polished Brass Pot Filler
Best for: heavy pot filling near the stove
- Mounting Type
- Deck mount
- Faucet Type
- Pot filler
- Hole Configuration
- Single-hole
- Valve Type
- Ceramic disc
- Dimensions
- 20 × 2.38 × 18.7 inches
- Weight
- 8.45 pounds
View on Amazon: Kingston Brass KS3702RKZ Polished Brass Pot Filler Affiliate link
This is a deck mount pot filler faucet made from solid brass. It features a polished brass finish and a 20-inch reach. The spout delivers 3.0 GPM at 60 PSI. A ceramic disc cartridge ensures drip-free operation. It mounts to a single hole. This faucet suits kitchens where you need a dedicated station for heavy pots and large stockpots.
Pros
- Solid brass construction for durability
- 20-inch spout reach
- Drip-free ceramic disc cartridge
- 3.0 GPM flow rate
Cons
- Single-hole mounting limits placement options
- 8.45-pound weight requires sturdy counter support
- Deck mount design needs specific sink configuration
Good fit if
- You cook large batches of soup or pasta
- You want a dedicated filling station near your stove
- You prefer solid brass durability over lighter materials
Skip if
- You need a pull-down or pull-out sprayer head
- Your sink setup only allows for a single standard faucet hole
- You prefer a wall-mounted fixture to save counter space
Verdict: Kingston Brass 20in Pot Filler is a sturdy, high-flow option for serious home cooks. It fits best in kitchens where a permanent, high-capacity filling station is a priority over versatile spray heads.
Specifications side by side
| Spec | Kingston Brass KS3702RKZ Polished Brass Pot Filler |
|---|---|
| Mounting Type | Deck mount |
| Faucet Type | Pot filler |
| Hole Configuration | Single-hole |
| Valve Type | Ceramic disc |
| Installation Type | Deck Mount |
| Features | Pot Filler |
| Dimensions | 20 × 2.38 × 18.7 inches |
| Weight | 8.45 pounds |
| Size | 20'' (L) x 2-3/8'' (W) x 18-11/16'' (H) |
| Color | Polished Brass |
| Model | KS3702RKZ |
Frequently asked questions
What finish does the Kingston Brass KS3702RKZ have?
This pot filler features a polished brass finish. This coating provides a warm, metallic look that complements traditional kitchen designs. Polished brass requires regular cleaning to maintain its shine and prevent tarnishing. You should use appropriate brass cleaners to keep the surface looking new over time.
How heavy is the Kingston Brass KS3702RKZ?
The unit weighs 8.45 pounds. This substantial weight helps stabilize the arm when you are lifting heavy pots. It reduces wobbling during use. Ensure your mounting surface can support this load securely. The solid brass construction contributes to this heft and overall durability.
What are the dimensions of this pot filler?
The faucet measures 20 inches in length, 2.38 inches in width, and 18.7 inches in height. The 20-inch reach allows you to fill large pots from a distance. The height accommodates standard stovetop burners. These dimensions ensure it fits most standard kitchen layouts without obstruction.
Is the Kingston Brass KS3702RKZ a deck mount faucet?
Yes, it is a deck mount model. It installs through a single hole in your countertop or backsplash. This configuration simplifies the installation process compared to wall-mounted units. You do not need to drill into the wall, which can be messy and require additional tools.
What is the primary function of this fixture?
It is designed as a pot filler. This allows you to fill large pots directly at the stove. You avoid carrying heavy, water-filled pots across the kitchen. It is ideal for frequent cooking tasks that require large volumes of water, such as boiling pasta or making stocks.
Does the Kingston Brass KS3702RKZ use ceramic disc valves?
Yes, it uses ceramic disc valves. These valves provide smooth operation and precise control over water flow. They are known for durability and leak resistance. Unlike rubber washers, ceramic discs do not degrade easily, ensuring long-term reliability without frequent maintenance or part replacements.