T&S Brass 5PR-8D08 Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This t s brass 5pr 8d08 review focuses on a commercial pre-rinse unit built for heavy use. It features lever handles for precise control and an 8-inch add-on spout. The faucet delivers 1.15 GPM from the spray valve and 4.61 GPM from the nozzle. These flow rates support consistent performance in high-demand kitchens. The chrome-plated brass body resists corrosion and heat. It meets NSF and ASME standards for safety and compliance. This spec-based look explains how these numbers translate to daily operation in a professional foodservice environment.
What stands out
- 1.15 GPM spray valve flow for targeted cleaning
- 4.61 GPM nozzle flow for rapid rinsing
- Chrome-plated brass construction for durability
- NSF 61-Section 9 and NSF 372 certified
- Operates within 20-125 PSI pressure range
Who it fits
Good fit for
You should choose this unit if you run a restaurant or commercial kitchen with high water pressure. The 1.15 GPM spray and 4.61 GPM nozzle flows handle tough food debris quickly. The chrome brass body withstands harsh cleaning chemicals and heat. Lever handles offer easy operation for staff. The NSF certifications ensure it meets health codes. It suits setups needing a reliable, compliant pre-rinse station that delivers consistent performance under pressure.
Who should skip it
You should skip this option if you need a residential dishwasher or low-flow eco model. The 4.61 GPM nozzle flow uses more water than typical home fixtures. The commercial brass construction is heavier and costlier than plastic alternatives. It requires specific PSI ranges (20-125 PSI) that may not match all home supply lines. If you want a compact, under-sink unit, this large add-on spout is too bulky for standard residential cabinetry.
Verdict: This pre-rinse unit delivers high flow rates and durable construction for commercial kitchens. It meets strict health codes and handles demanding daily use.
Key specs explained for this unit
Flow: 1.15 GPM spray valve
This rating shows the water volume from the handheld sprayer. You get enough pressure to scrub heavy food residue without wasting water. It meets modern efficiency standards for commercial settings. When shopping, compare this to units with higher flow rates if you need faster rinsing, but note that lower flow saves on utility costs over time.
Flow: 4.61 GPM nozzle
This is the water volume delivered through the fixed overhead nozzle. It provides a broad, consistent spray pattern for rinsing large pots and pans. This higher volume helps remove loose debris quickly before the spray valve takes over. Check this spec against other models to ensure it matches your kitchen's water pressure capabilities and rinsing needs.
Construction: Chrome plated brass
The body is made of brass with a chrome finish. This material resists corrosion and withstands harsh cleaning chemicals found in restaurants. It maintains a clean look under bright kitchen lights. When comparing, look for solid brass construction rather than plastic internals, as this ensures long-term durability in high-demand commercial environments where hygiene is critical.
Certification: NSF 61 and 372
These certifications confirm the materials are safe for drinking water and contain no lead. This is crucial for health compliance in any food service operation. You avoid potential regulatory fines or health code violations. Always verify these marks when buying for commercial use, as they ensure the unit meets strict federal and industry health benchmarks for potable water contact.
Control: Lever handles
Lever handles allow you to turn water on and off with a simple lift or push. This design is easier to operate with wet or gloved hands compared to knobs. It offers precise control over flow and temperature. When evaluating, consider how often you will use it; levers are generally more durable and convenient for fast-paced kitchen workflows than traditional handles.
Design and Build Quality
The listing specifies a polished chrome plated brass body. This material choice targets durability in demanding foodservice environments. Chrome resists corrosion and simplifies cleaning, which matters in busy kitchens. You get a heat-resistant handle and lever controls. These levers allow you to adjust flow and temperature quickly. Precision matters when you rinse heavy residue from pots. The design prioritizes speed and reliability over manual knob adjustments.
According to the listing, the unit weighs 14.3 pounds and measures 28 inches wide by 12 inches long. The height is listed as 4 inches. These dimensions suggest a robust, wall or deck mounted fixture rather than a lightweight portable unit. The 8-inch add-on spout extends the reach, giving you more clearance for large cookware. This layout helps you position heavy items under the spray without strain.
The construction includes an overhead spring and a spray valve holder. These components keep the hose organized and prevent tangling during rapid use. The faucet operates within a pressure range of 20 to 125 PSI. This flexibility means it works with various commercial plumbing setups. You do not need specialized high-pressure lines to get consistent performance. The build focuses on withstands daily abuse and maintains function over time.
Setup and Everyday Use
Installing this unit requires matching your kitchen’s plumbing to its operational limits. The faucet operates within a pressure range of 20 to 125 PSI and water temperatures between 40 and 140 degrees Fahrenheit. You must ensure your supply lines meet these standards before connecting the 28-inch wide base. The model weighs 14.3 pounds, so you need a sturdy deck or sink mount to support the chrome-plated brass body securely.
Daily use relies on the lever handles for control. You adjust flow and temperature by moving these levers. The 8-inch add-on spout extends over the sink, giving you reach for large pots. The spray valve delivers 1.15 GPM, while the nozzle outputs 4.61 GPM. This dual flow system lets you switch between a focused spray for scrubbing and a wider rinse for clearing debris. The heat-resistant handle ensures you can adjust settings even if the unit is hot.
The chrome finish simplifies cleaning. You can wipe down the surface without worrying about corrosion or tarnish. The design complies with NSF 61 and NSF 372 standards, which means materials are safe for potable water contact. You do not need to worry about chemical leaching during daily rinsing tasks. The ISO-certified construction suggests consistent performance over time. You get reliable operation for high-demand commercial tasks without complex maintenance routines.
Key Considerations Before You Buy
You are buying a commercial pre-rinse unit, not a residential appliance. This T&S Brass model is an add-on faucet designed to mount above your sink. You must verify that your existing plumbing can handle the required pressure range of 20 to 125 PSI. The unit also requires water temperatures between 40 and 140 degrees Fahrenheit to function correctly. Since it is a standalone faucet, you need to ensure your sink setup has the necessary mounting points for the 8-inch spout. Chrome plating requires regular wiping to prevent water spots and maintain its shine. This unit fits into commercial kitchens where high-volume dishwashing is routine. It does not replace a dishwasher. Instead, it works alongside one to remove heavy food residue before the wash cycle. You should check if your current spray hose is compatible with the 1.15 GPM flow rate. Proper maintenance ensures the lever handles and overhead spring remain durable over time.
Check before you buy
- Verify your plumbing supports 20-125 PSI pressure.
- Ensure water supply matches 40-140 Fahrenheit range.
- Confirm sink has space for 8-inch add-on spout.
- Check compatibility with existing spray hose fittings.
The product at a glance
T&S Brass Chrome Pre-Rinse Faucet with 8-Inch Add-On Spout
Best for: Commercial kitchens needing high-flow rinsing
- Mounting Type
- Deck Mount
- Faucet Type
- Pre-Rinse
- Control Type
- Lever handles
- Spout Swivel
- Swing
- Features
- Add-On Spout
- Color
- Chrome
View on Amazon: T&S Brass Chrome Pre-Rinse Faucet with 8-Inch Add-On Spout Affiliate link
This T&S Brass pre-rinse unit delivers a 1.15 GPM spray valve and 4.61 GPM nozzle flow. It features chrome-plated brass construction and lever handles. The unit measures 12 inches long and weighs 14.3 pounds. It operates within 20-125 PSI and 40-140 Fahrenheit. This setup suits restaurant kitchens and high-demand commercial operations needing durable, compliant fixtures.
Pros
- 1.15 GPM spray valve flow for consistent performance
- 4.61 GPM nozzle flow for effective rinsing
- Chrome-plated brass body for durability
- NSF 61-Section 9 and NSF 372 certified
Cons
- Requires 20-125 PSI water pressure to operate
- Heavier build at 14.3 pounds
- Limited to 12-inch length for installation space
Good fit if
- You need a high-flow commercial pre-rinse unit
- You require NSF certified components for health compliance
- You have water pressure between 20-125 PSI
Skip if
- You need a low-pressure compatible unit below 20 PSI
- You prefer a compact unit under 10 inches long
- You want a residential-style faucet with lower flow rates
Verdict: T&S Brass 5PR-8D08 Pre-Rinse Unit provides robust commercial performance with high flow rates and durable brass construction. It fits busy restaurant kitchens that demand certified, high-pressure rinsing capabilities.
Specifications side by side
| Spec | T&S Brass Chrome Pre-Rinse Faucet with 8-Inch Add-On Spout |
|---|---|
| Mounting Type | Deck Mount |
| Faucet Type | Pre-Rinse |
| Control Type | Lever handles |
| Spout Swivel | Swing |
| Installation Type | Deck Mount |
| Features | Add-On Spout |
| Color | Chrome |
| Spout Reach | 8-Inch |
| Dimensions | 12 × 28 × 4 inches |
| Weight | 14.3 pounds |
| Size | not_applicable |
| Model | 5PR-8D08 |
Frequently asked questions
What are the physical dimensions of the T&S Brass 5PR-8D08?
The unit measures 28 inches in width, 12 inches in length, and 4 inches in height. It weighs 14.3 pounds. These dimensions help you determine if it fits your sink area. The compact height allows for easy access while rinsing large items.
Does this faucet include a spray wand?
Yes, it comes with an 8-inch add-on spout. This spout functions as the spray valve for rinsing. You can use it to direct water precisely onto dishes. The 8-inch length provides reach without requiring excessive arm movement during heavy-duty cleaning tasks.
What finish does the T&S Brass 5PR-8D08 have?
It features a polished chrome finish. This material resists corrosion and simplifies cleaning in busy kitchens. Chrome maintains a bright appearance with minimal maintenance. You will find it durable enough to withstand the harsh conditions typical of commercial foodservice environments.
Is this unit suitable for commercial kitchens?
Yes, it is designed for commercial kitchens needing high-flow rinsing. The robust brass construction supports heavy daily use. It delivers certified high-pressure rinsing capabilities. This makes it ideal for busy restaurant settings where speed and durability are essential for operational efficiency.
How much water does this faucet use?
It uses 1.15 GPM from the spray valve and 4.61 GPM from the nozzle. These flow rates meet modern efficiency standards for commercial settings. You get enough pressure to scrub heavy food residue. The design balances water conservation with the cleaning power needed for professional dishwashing.
What type of handles does this model use?
It uses lever handles for precise control. These levers allow you to adjust water flow and temperature easily. The handles are heat-resistant for safety. You can operate them quickly with one hand, which is helpful when managing multiple tasks in a fast-paced kitchen environment.