T&S Brass B-1115-132X Faucet Workboard Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This t s brass b 1115 132x faucet workboard review focuses on a wall-mount mixing faucet built for durability. The T&S Brass B-1115-132X features a chrome-plated brass body and a 2 7/8-inch swivel or rigid gooseneck. It delivers water at a steady 2.2 GPM through an aerator. The unit includes lever handles and compression cartridges with spring checks. Its compact design measures 8.5 inches in width and 13.3 inches in height. This faucet is certified to meet ADA requirements and various safety standards, making it a practical choice for high-traffic commercial or industrial sink setups.
What stands out
- Chrome-plated brass body for corrosion resistance
- 2.2 GPM flow rate with aerator
- Swivel or rigid 2 7/8" gooseneck
- ADA compliant lever handles
- NSF 61 and NSF 372 certified
Who it fits
Good fit for
You should choose this faucet if you need a reliable, code-compliant solution for a commercial kitchen or industrial workspace. The wall-mount design saves counter space, while the 2.2 GPM flow balances water conservation with adequate pressure. Its ADA-compliant lever handles make it accessible for users with limited hand strength. The chrome-plated brass construction ensures longevity in wet environments. If you require a sturdy, certified faucet that meets strict safety standards, this model fits your needs well.
Who should skip it
Skip this option if you prefer a deck-mount faucet or need a higher flow rate than 2.2 GPM. The wall-mount installation requires specific plumbing compatibility, which may not suit all existing setups. If you need a flexible hose or a pull-down sprayer, this rigid or swivel gooseneck design will not meet your needs. Additionally, the compression cartridges may require more frequent maintenance compared to ceramic disc valves. Users seeking a modern, minimalist aesthetic might find the chrome-plated brass look too traditional.
Verdict: The T&S Brass B-1115-132X is a durable, code-compliant wall-mount faucet ideal for commercial use. Its sturdy build and accessible handles make it a practical choice for high-traffic areas.
Key specs explained
Flow rate: 2.2 GPM
This faucet delivers 2.2 gallons of water per minute. This flow rate balances efficiency with sufficient pressure for filling containers or rinsing hands. You get steady output without excessive water waste. When shopping for dishwashers, note that this faucet provides adequate pre-rinsing capability. It supports water conservation goals while maintaining practical utility for daily kitchen tasks and light cleaning duties.
Construction: Chrome-plated brass
The body uses brass covered in a chrome layer. Brass offers strong durability and resistance to corrosion. The chrome finish provides a smooth, easy-to-clean surface that resists tarnishing. This combination ensures long-term reliability in wet environments. You benefit from a sturdy fixture that withstands frequent use. This material choice signals professional-grade quality suitable for high-traffic commercial or home kitchens.
Mounting: 4-inch wall mount
This unit attaches directly to the wall rather than the countertop. A 4-inch footprint saves valuable counter space. You gain more room for food prep or other tasks. This design also simplifies cleaning around the base since there are no holes in the sink deck. It suits setups where under-sink clearance is limited or where a clean, uncluttered workspace is a priority for your kitchen layout.
Max pressure: 125 psi
The faucet handles water pressure up to 125 psi. This rating ensures safe operation under standard municipal water supply conditions. You can rely on consistent performance without risk of damage from normal pressure spikes. If your home has high water pressure, this spec confirms compatibility. It prevents leaks or joint failures that might occur with lower-rated fixtures, ensuring long-term peace of mind.
Design and build details
According to the listing, the T&S Brass B-1115-132X features a chrome-plated brass body. This material choice suggests durability and resistance to corrosion in wet environments. The faucet includes a chrome-plated escutcheon for a consistent finish. You get a silver color that matches standard commercial fixtures. The construction uses compression cartridges with spring checks. This mechanism helps prevent backflow and ensures reliable operation over time. You benefit from a design that prioritizes function over complex electronics.
The unit measures 8.5 inches in width, 13.3 inches in height, and 3.5 inches in length. It weighs 3.9 pounds. These dimensions allow it to mount securely to a wall. The 2 7/8-inch gooseneck can be set as swivel or rigid. A swivel neck offers flexibility for filling large pots. A rigid setup saves space and reduces accidental movement. You choose the configuration that fits your workspace layout best.
Controls consist of lever handles. This style allows for quick opening and closing with one hand. The faucet operates within a pressure range of 20 to 125 psi. It handles water temperatures from 40 to 140 degrees Fahrenheit. This range covers most cleaning and rinsing needs. The 4-inch wall mount design keeps the fixture out of the way. You gain more counter space for tasks. The compact footprint suits tight work areas.
Installation and Daily Operation Guide
Setting up this faucet involves mounting it to the wall. The unit uses 1/2-inch NPT male inlets for connection to your plumbing lines. You must ensure your water pressure stays between 20 psi and 125 psi for proper function. Temperatures between 40 F and 140 F are supported. The faucet includes a chrome-plated escutcheon that covers the wall opening for a clean look. You do not need to worry about complex assembly beyond connecting the inlet pipes.
Daily use is straightforward. The lever handles allow you to adjust water flow and temperature easily. You can switch between a swivel or rigid gooseneck configuration depending on your workspace needs. The 2 7/8-inch neck provides reach over sinks or work areas. Water exits through an aerator at a steady 2.2 GPM. This flow rate is consistent for rinsing or filling containers.
The design meets ADA ANSI/ICC A117.1 requirements, which may assist users with limited mobility. The compression cartridges with spring checks help maintain reliable performance over time. You benefit from a chrome-plated brass body that resists corrosion. The unit weighs 3.9 pounds and measures 13.3 inches in height. This compact footprint fits well in tight commercial or home kitchens. You get a durable tool built for frequent use without complicated maintenance steps.
Before You Buy This Faucet
Before you buy this T&S Brass B-1115-132X, consider how it fits your workflow. This unit is a wall-mount faucet, not a countertop dishwasher. You need existing plumbing with 1/2-inch NPT male inlets. Check your water pressure. It must stay between 20 and 125 psi. Temperatures should range from 40 to 140 degrees Fahrenheit. The chrome-plated brass body resists corrosion. You should clean it regularly to maintain the silver finish. Use a soft cloth. Avoid abrasive cleaners. This faucet suits commercial kitchens or heavy-duty home stations. It does not replace a dishwasher. You still need a separate dishwashing machine. Ensure your sink area has space for the 2 7/8-inch gooseneck. The swivel feature helps reach different spots. Verify your local codes. It meets ADA and NSF standards. This spec-focused guide helps you decide if this durable fixture matches your needs. Compare it with other options to find the best fit for your space.
Check before you buy
- Verify your plumbing uses 1/2-inch NPT male inlets
- Check water pressure is between 20 and 125 psi
- Ensure temperature ranges from 40 to 140 degrees Fahrenheit
- Confirm you have a separate countertop dishwasher
- Measure space for the 2 7/8-inch swivel gooseneck
The product at a glance
T&S Brass 2.2 GPM Wall Mount Faucet
Best for: commercial workboard installations
- Mounting Type
- Wall mount
- Faucet Type
- Mixing faucet
- Control Type
- Lever handles
- Spout Swivel
- Swivel/rigid
- Color
- Silver
- Dimensions
- 3.5 × 8.5 × 13.3 inches
View on Amazon: T&S Brass 2.2 GPM Wall Mount Faucet Affiliate link
This T&S Brass workboard faucet mounts to your wall and features a chrome-plated brass body. It includes a 2 7/8-inch swivel gooseneck with a 2.2 GPM aerator. The unit meets ADA requirements and carries NSF certifications for safety. It operates between 20 and 125 psi. You need 1/2-inch NPT male inlets for installation. This model suits commercial or heavy-duty kitchen setups where durability and compliance matter.
Pros
- Chrome-plated brass body for corrosion resistance
- 2.2 GPM aerator saves water without sacrificing pressure
- Swivel gooseneck offers flexible reach
- Certified to NSF 61 and ADA standards
Cons
- Wall-mounted design requires specific plumbing setup
- Compression cartridges may need periodic maintenance
- Limited to 2.2 GPM flow rate
Good fit if
- You need a commercial-grade faucet for a workboard
- You require ADA-compliant fixtures for accessibility
- You have existing 1/2-inch NPT male inlets
Skip if
- You prefer a deck-mounted installation
- You need a flow rate higher than 2.2 GPM
- You want a faucet with a rigid gooseneck only
Verdict: T&S Brass Wall-Mount Faucet is a durable, certified option for workboards. It fits users who need ADA compliance and reliable commercial performance.
Specifications side by side
| Spec | T&S Brass 2.2 GPM Wall Mount Faucet |
|---|---|
| Mounting Type | Wall mount |
| Faucet Type | Mixing faucet |
| Control Type | Lever handles |
| Spout Swivel | Swivel/rigid |
| Color | Silver |
| Dimensions | 3.5 × 8.5 × 13.3 inches |
| Weight | 3.9 pounds |
| Size | not_applicable |
| Model | B-1115-132X |
Frequently asked questions
Is the T&S Brass B-1115-132X ADA compliant?
Yes, this faucet is designed for ADA compliance. It fits users who need accessible features in commercial workboard installations. The wall-mount design and specific dimensions support accessibility requirements. You can rely on this unit for environments where ADA standards are necessary for daily operations.
What are the exact dimensions of this faucet?
The T&S Brass B-1115-132X measures 8.5 inches in width, 13.3 inches in height, and 3.5 inches in length. These dimensions define its footprint on the wall. You should verify your workspace allows for this specific size before installation to ensure proper fit and function.
How much does this faucet weigh?
This unit weighs 3.9 pounds. The weight reflects the solid brass construction and chrome plating. This mass provides stability during operation. You do not need to worry about excessive movement during use, as the design ensures a secure and steady feel.
What color finish does this model have?
The faucet features a silver color finish. This is achieved through chrome plating on the brass body. The finish is consistent across the unit, including the escutcheon. You get a professional look that resists corrosion in wet commercial environments.
Is this faucet suitable for commercial workboards?
Yes, it is best for commercial workboard installations. The durable build and certified performance suit high-use settings. You get reliable operation for tasks like rinsing or filling containers. This model is engineered to withstand the demands of professional kitchen or work areas.
What is the model number for this T&S Brass faucet?
The model number is B-1115-132X. This identifier distinguishes it from other T&S products. You should use this number when ordering parts or checking compatibility. It ensures you receive the exact 2.2 GPM wall-mount faucet with the specified dimensions and finish.